PRINT GOCCO CD-Printer B6

This model replaced by PG-11 Machine Only - Details . .

The 'Colour Design' Printer is a printer unit only [can not image Print Masters] for use with the B6 size Print Masters.

Important: Printing Compact Discs [CD's] can be done, but not with this product. Go to the Training Section to find out how it's done. Click here . .

deally the CD-Printer is an addition to a PG-5 (or previous model B6) system for performing the occasional 'full colour' process print or art print - without having to purchase an entire new PG system.

An adjustable Pad Table provides registration features similar to the PG-11 system.

 

Specifications
Master making method	Not applicable
Stage size [WD]	Not applicable
Power supply	Not applicable
Screen size	B6 Print Master [109mm x 158mm / 4.29 x 6.22 inches]
Machine Size [WHD]	215mm x 215mm x 80mm
Machine Weight	1.3Kg [2.87lb]

How the CD-Printer is used

	1/ Select your design and image your Print Master in your PRINT GOCCO, as per normal procedure. The PRINT GOCCO can be either PG-5, PG-11, PG Arts, B6, MG-11 or SP-275 ScreenFax.
	2/ Ink you Print Master with the desired colours - replace the plastic protector flap over the ink.
	3/  Insert the Print Master into the CD-Printer and perform a test print onto card/ paper to begin the ink flow
	4/  Insert the Registration Plate into the CD-Printer.
	5/ Performa a normal print, onto the Registration Plate, lift the Lid of the machine
	6/  Unlock the Alignment Pegs on the Pad Table and adjust the pad table under the 'copy' of the print. Once you have registered your design, simply lock the Alignment Pegs.
	7/ Remove the Registration Plate from the CD-Printer and perform an addition print onto your card/ paper. The print will remain aligned unless the Pad Table was moved before locking the Alignment Pegs (in which case simply repeat the alignment process)