Related links Imaging B6 Print masters with MG-11  Inking Techniques
		Video links Imaging a screen Mounting mesh to a frame Screen printing technique
		Product links NEHOC Screen Printing Kit PRINT GOCCO systems
		Download links MG-11 Operation manual
		Page links Technical support Contact Us Print this page

RISO MG-11 Image Processor

The RISO MG-11 is an electronic system - NO PRINT LAMPS - designed for both imaging B6 size Print Masters/ SP-8 Masters/ 135 Mesh and also smaller MG-11 Masters for business card printing.

MG-11 production was discontinued in 1999, leaving the RISO SP-275 as the sole electronic Image Processor model.

The MG-11 provides considerable benefits to a PRINT GOCCO systems by lowering the operational costs, as NO Print Lamps are used for creating Print Masters.

The MG-11 operates on a similar principal to the SP-275 system, with Xenon tubes providing the necessary 'flash'. However unlike the SP-275 system, the intensity of the 'flash' can not be changed on the MG-11 system.

Imaging B6 Print Masters with MG-11

Firstly, you must have your artwork prepared ready for imaging - see Artwork Types & Preparation if unsure - this being a carbon original free of moisture.

B6 Print Masters are imaged in 3 separate flashes. Alignment is through use of the red alignment dots on the left of the Print Master  - these being aligned against the arrows on the MG-11 Machine.

1. Align the top red dot against the top arrow - if your design is within the Stage Glass area otherwise use the middle set of arrows.

2. Flash the design and move through the machine aligning the dots and the arrows according to your design size.

3. Continue until all the area is finished.

• Overlapping the design for two flashes will not adversely effect your Master

• Start from one end and work your way down the design - DO NOT image each end and then attempt the middle section.

It's that simple and easy to make a Print Master - Just ensure that your artwork is prepared and free of moisture for the best result every time.

Specifications
Master making method	Strobe flash system [1 x reusable Xenon lamp]
Stage size [WD]	104mm x 54mm [4.09 x 2.13 inches]
Power supply	AC 100V/220V
Screen size	MG-11 Print Master [98mm x 62mm / 3.86 x 2.44 inches]
Machine Size [WHD]	220mm x 70mm x 160mm [8.66 x 2.76 x 6.3 inches]
Machine Weight	1.5Kg [3.3lb]
Power Consumption	120W