|Place mouse over 'Products > Screen Printing' menu above to display extra options|
|Page Location: Home > Screen Printing > Supplies|
Screen Printing Supplies
Available in four sizes and two construction types, frames are used to hold the ScreenMaster screen printing mesh in place whilst printing.
All frames are re-usable and highly durable ensuring your continuing costs are extremely low.
Applied to the jig board, table or surface printing is performed on, Table Adhesive keeps the material steady and eliminates any movement, blurring, overprinting that may occur when screen printing.
Read FAQ's on Table Adhesive - Click here . .
Prolongs the drying time of ink making it easier to work with and ensure ink does not dry in the screen. Used mostly with Aquatex Opaque inks.
The side effect is the item you print also takes longer to air dry, but sets normally when heat set.
Renew your frames life by replacing the double sided tape that hold the RISO ScreenMaster in place. By replacing the tape every 3-4 screens, your frames will last for ever.
Contents: Roll 50 Metres
A clear PVC bottle makes mixing and storing inks easier than ever. You no longer have to throw away mixed colours, or have them dry out in unsuitable containers. Completely re-usable, just wash with water to remove the previous ink colour when finished!
Easy to clean and re-use.
Colour mixing made easy with a simple to use colour wheel listing colour additions for red, blue, yellow, white & black.
There's 2 easy to view sides instantly showing you the 'illustrations of colour relationships', better known as mixed colour.
Available in 2 sizes - Pocket Size [13cm Dia.] for handy use and also a larger eye friendly 23.5 Diameter size.
When using the PRINT GOCCO system for imaging screens the Print Lamps are required for screen creation.
Contents: Pack 10
Prepare your Artwork BEFORE you image your screen and get a perfect result. For full details of Artwork Types and Preparation - Click here . .
Contents: Roll 30 Metres
Used when printing T-shirts, cloth/ fabric, Adhesive Boards are portable and will instantly hold your materials in place whilst printing.
Stops ink printing 'through' materials and t-shirts onto reverse side
Simply remove the plastic cover and place the adhesive Board under your material. Used with both Stamp Kit for Cloth and Screen Printing applications.
Contents: Set 10
This is a MUST for all printing as a simple spot or problem is easily overcome by applying Correction Fluid to the screen.
Quickly and easily block unwanted marks, additional images or spotting on your screen.
Contents: Each 20ml
A perfect flat, non absorbent surface so you can easily and quickly mix ink colours. Ink can stay on the plastic for long periods of time and when you have finished, simply wash up in water, with no problems about bending/ bucking, etc.
Contents: Each or Bulk Buy Discount Pack of 10
Required when printing 'off contact' and also when using some fabric inks [Hy-Cover & Hy-Puff]
Plastic height adjustors are a solid plastic board that you cut to size as required, simply by scoring with a knife and breaking off - it's that easy!
Height Adjustors can be used with Jig Hinges [code: S-360], or attached to the back of any frame with Screen Masking Tape [code: T36]
Contents: Pack 10
Simple to apply and a low cost item to prolong the life of your screens.
Contents: Roll 75 Metres