|
|
Place mouse over 'Products > Ceramics' menu above to display extra options |
Page Location: Home > Ceramics > Inks > KERA Onglaze printing ink |
|
|||
|
|||
|
|||
|
|||
|
KERA Onglaze [formerly CGA Onglaze] Printing Inks are ready to use for printing over glazed surfaces. Print on either a raw or fired glaze.
About Onglaze Inks
Using the NEHOC ceramic printing system and CGA Onglaze Inks, both simple and intricate designs are easily applied to any ceramic article. CGA Onglaze Inks are also suited to sponging which gives a mottled effect. Brushing colours are also available to further decorate printed designs.
Blank, already glazed tiles may be printed to produce a unique set for your bathroom or kitchen.
CGA Onglaze Inks are fired at high temperature and may be included in the "gloss firing" of other pieces. This eliminates the need for a separate low temperature third firing, traditionally used to fire low temperature decals. This allows a great saving in time and energy costs!
Unlike decals and traditional transfers, Onglaze Inks become part of the glaze surface during firing and form a durable, dishwasher safe product.
Available in a wide range of colours, all colours are intermixable.
KERA Onglaze | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shake bottle to thoroughly mix the ink.
Close the lid of the Ink bottle immediately after applying to the screen to prevent contents drying out.
Applying your design by Transfer Printing or Direct Screen Printing
If a mistake is made with the CGA Onglaze ink, do not panic any unwanted ink may be easily removed by simply wiping with a damp sponge soaked in water. This can be done at any stage, including when the ink is fully dry.
Up to four layers of Onglaze Ink may be printed. Do not apply a greater number of layers, as a rough, non-dishwasher safe surface will result.
When using Transfer Paper, allow no more than five minutes between printing and transfer to the curved surface. Longer periods will result in an incomplete transfer of your design to the piece.
Print on raw or fired glaze surfaces
Use on earthenware, stoneware or porcelain pieces
Firing temperature: 1080-1250 oC [Cone 04-7] , oxidising atmosphere
Dishwasher resistant
Water soluble in unfired state
Drying time: 5 minutes
All Onglaze Inks are intermixable to achieve new colours!
Up to four layers of Onglaze Ink may be printed
For food containing pieces, use only on the exterior
Clean-up: cold water only