|
|
Place mouse over 'Products > Ceramics' menu above to display extra options |
Page Location: Home > Ceramics > Inks > FastBright low firing onglaze & glass ink |
|
|||
|
|||
|
|||
|
About FastBright
FastBright™ colours make ceramic onglaze and glass decoration simple. Newly developed fast-drying polymer mediums coupled with high-stability pigments allow artists a new degree of freedom across temperature ranges 590°C to 830°C.
Drying takes as little as 15 minutes and overcomes the problems associated with pine oil/ solvent mediums.
Colours are smudge-free, providing artists with a clean working environment and the choice to apply additional colours whilst handling the piece.
The solvent/oil free composition of this new medium means safer working conditions and reduced damage to the environment.
Cleaning requires water only and removes the need for hazardous chemicals, such as mineral turpentine.
The NEHOC ceramic printing system can safely be used with FastBright™ colours due to the absence of solvents.
In addition to printing, FastBright™ colours may also be brushed and air-brushed. The fast-drying medium allows excellent control with the brush and superior processing of the pigments allows trouble free use with fine air-brushing devices.
Shake bottle containing FastBright™ colour.
Close the lid of the Ink bottle immediately after applying to the screen to prevent contents drying out
Applying your design by Direct Screen Printing method
If a mistake is made with the FastBright™ colour, any unwanted ink may be easily removed by simply wiping with a damp sponge soaked in water. This can be done at any stage, including when the ink is fully dry.
Soak screen and other tools in a bucket or sink of cold water for ten minutes. Wash off under cold running water. Do not use detergents or solvents of any kind [spirits, mineral turpentine, etc.] as this will damage the screen and squeegee.
Colour Chart
To view the FastBright™ Colour Chart - Click here . .