S-242  B6 Blue FilterBlue Filter for Photocopied Designs

Product Code: S-242 and S-250

For use when imaging RISO ScreenMaster or PRINT GOCCO Print Masters using a photocopy for artwork.

The Blue Filter reduces the level of the heat produced by the Print Lamps, as photocopies have a high level of carbon content - more than the mesh actually requires to image a screen.

For full details see Artwork Types.

Available Sizes

S-242 B6 Blue Filter B6 Blue Filter
Used with photocopies where Artwork Clean-Up process is not preformed
  S-250 B5 Blue Filter B5 Blue Filter
Used with photocopies where Artwork Clean-Up process is not preformed

 

  • Product Home
  • Specifications
  • Accessories
  • Support

Key Features

 

Fits PG-5, PG-11 and B6 models

Reduces excess carbon deposits

Reusable

 

Usage

 

Used with Print Lamp imaging systems only.

S-868 Operation Manual

 

 

Cleaning

Wipe with dry lint free cloth.

Return to storage pouch immediately after use.

Contents

 

S-242 - Pack 2

S-250 - Each.

View large image . .

S-250  B5 Blue FilterS-242  B6 Blue FilterSpecifications

 

S-242 B6 Blue Filter

Item Weight [Kg]: 0.030

Pack Length: 150mm

Pack Width: 235mm

Pack Height: 002mm

Cbm: 0.018 Kg

 

S-250 B5 Blue FIlter

Item Weight [Kg]: 0.020

Pack Length: 230mm

Pack Width: 320mm

Pack Height: 2mm

Cbm: 0.036 Kg

 

 

Price and Availability

All prices are online in NEHOCdirect - select the 'Just Looking' option in Step 2.

 

Ask a Question

Complete the Product Assistance Form for a quick reply to any question not answered in the FAQ's or training section - click here . . Select the product code listed at the top of this page.

FAQ's

 

What temperature do I set the press to?

Do I need to add water and/or use the steam option?

Why is steam coming from the design?

How long do I set for - when do I know the prints are set?

What happens if I don't set the inks for long enough?

 

Q) What temperature do I set the press to?
You must adjust the press to suite the type of fabric as overheating may cause burning of the fabric.
Cotton = cotton setting with Cotton/ polyester = poly setting

If unsure it's always best to start at a lower setting and test the first garment, you can always increase the setting slightly after you begin if the first prints are not heating the garment.

Never overheat the garment as this will cause burning to the fabric - it's better to set for 15-20 seconds with a short 5 second break and repeat a few times than try to set for 1 minute continuously.

Q) Do I need to add water and/or use the steam option?
No there is no need to use the steam option, the press will turn on and work normally without water.
As you are trying to eliminate the water based medium from the ink and dry the print out, steam will make this process very difficult.

Q) Why is steam coming from the design?
This is the water based medium heating up and coming out of the design as steam - this is normal.
Steam starts to appear once the design comes up to temperature, then starts to slow and disappear half way through the setting process.

If a print is completely dry (more than 5 days old) no steam may appear at all and will require setting for 30-40 seconds only. If a print is wet and no stream is present you will need to increase the temperature of the press.

Q) How long do I set for - when do I know the prints are set?
How long is a piece of string? Generally speaking, the first 20 seconds of the setting process brings the ink and garment up to temperature, the next 20 seconds eliminates the water based medium (steam rises), the next 20 seconds starts the pigment activation and setting of the ink.
- Large or solid designs will require a longer setting period as there is more volume of ink to activate and set.

A minimum of 1 minute is normally required for almost any print, increasing up to 3 minutes for wet prints.

As the actual timing varies on the design size, how long since it's been printed and the volume of ink in the design. A simple rule to start with is that when steam stops rising you are half way through the setting process.
e.g. If steam stops 
rising after 40 seconds (2 presses), your setting time is 1 minute 20 seconds (4 presses).

Q) What happens if I don't set the inks for long enough?
After 5 minutes the inks will not readily wash out of the garment and are starting to air dry. When washed, water will begin to attack the un activated pigments dilute the medium coating the fibres of the fabric. It's this removal of the pigments which causes the design to fade
Further washing will continue the fading process for up to 10 washes, where no more pigment can be removed

 

 

Page Information:

Level: Beginner to Advanced

< Previous: S-138 Photo Dot Screen

> Next: Artwork Accessories Homepage

Products: S-242 Blue Filter and S-250 B5 Blue Filter

Manufacture notice: S-242, S-250

Last modified: 28 October, 2009