S-524  Bulk Supplies PackBulk Supplies Pack

Product Code: S-524

Save costs using this bulk supplies pack to top up your printing supplies.

Designed for Schools, education and use with Thermal-Copier imaging systems, by buying plain frames and taping yourself you save on costs.

Reuse your carton with a refill pack of ScreenMaster further saving costs.

Picture right for illustration purposes only, manual not supplied in pack (available on NEHOC Training CD).


  • Product Home
  • Specifications
  • Accessories
  • Support




S-868 Operation Manual

A4 Thermal-Copier Operation Guide

A3 Thermal-Copier Operation Guide

IS01 - Artwork Types and Preparation

IS05 - Imaging ScreenMaster using Print Lamps

IS06 - Framing ScreenMaster

IS25 - Screen Printing Technique

IS35 - NEHOC Screen Printing Kit Setup & Operation Guide

IS40 - Imaging ScreenMaster using a Thermal-Copier




See individual product items for details.



Supplied loose.

5 Metres

RISO ScreenMaster 70Mesh 30cm x 5M - Refill Pack


Small Plastic Frame - No Tape


Large Plastic Frame - No Tape


Frame Mounting Tape


1 x 170mm Long Life Professional Squeegee





Item Weight [Kg]: 1.130

Supplied loose

Cbm: 1.890 Kg



Price and Availability

All prices are online in NEHOCdirect - select the 'Just Looking' option in Step 2.


Ask a Question

Complete the Product Assistance Form for a quick reply to any question not answered in the FAQ's or training section - click here . . Select the product code listed at the top of this page.



What temperature do I set the press to?

Do I need to add water and/or use the steam option?

Why is steam coming from the design?

How long do I set for - when do I know the prints are set?

What happens if I don't set the inks for long enough?


Q) What temperature do I set the press to?
You must adjust the press to suite the type of fabric as overheating may cause burning of the fabric.
Cotton = cotton setting with Cotton/ polyester = poly setting

If unsure it's always best to start at a lower setting and test the first garment, you can always increase the setting slightly after you begin if the first prints are not heating the garment.

Never overheat the garment as this will cause burning to the fabric - it's better to set for 15-20 seconds with a short 5 second break and repeat a few times than try to set for 1 minute continuously.

Q) Do I need to add water and/or use the steam option?
No there is no need to use the steam option, the press will turn on and work normally without water.
As you are trying to eliminate the water based medium from the ink and dry the print out, steam will make this process very difficult.

Q) Why is steam coming from the design?
This is the water based medium heating up and coming out of the design as steam - this is normal.
Steam starts to appear once the design comes up to temperature, then starts to slow and disappear half way through the setting process.

If a print is completely dry (more than 5 days old) no steam may appear at all and will require setting for 30-40 seconds only. If a print is wet and no stream is present you will need to increase the temperature of the press.

Q) How long do I set for - when do I know the prints are set?
How long is a piece of string? Generally speaking, the first 20 seconds of the setting process brings the ink and garment up to temperature, the next 20 seconds eliminates the water based medium (steam rises), the next 20 seconds starts the pigment activation and setting of the ink.
- Large or solid designs will require a longer setting period as there is more volume of ink to activate and set.

A minimum of 1 minute is normally required for almost any print, increasing up to 3 minutes for wet prints.

As the actual timing varies on the design size, how long since it's been printed and the volume of ink in the design. A simple rule to start with is that when steam stops rising you are half way through the setting process.
e.g. If steam stops 
rising after 40 seconds (2 presses), your setting time is 1 minute 20 seconds (4 presses).

Q) What happens if I don't set the inks for long enough?
After 5 minutes the inks will not readily wash out of the garment and are starting to air dry. When washed, water will begin to attack the un activated pigments dilute the medium coating the fibres of the fabric. It's this removal of the pigments which causes the design to fade
Further washing will continue the fading process for up to 10 washes, where no more pigment can be removed



Page Information:

Level: Beginner to Advanced

< Previous: Packs Homepage

> Next: S-525 Screen Repair Pack

Products: S-524 Bulk Supplies Pack

Last modified: 28 October, 2009